CommScope NETCONNECT Category 6 U/UTP Cable

CommScope NETCONNECT Category 6 U/UTP Cable

DETAILS:

CommScope NETCONNECT Category 6 U/UTP Cable

CS34Z3 Category 6 U/UTP Cable, low smoke zero halogen, white jacket,

4 pair count, 1000 ft (305 m) length CommPak

Product Classification

• Regional Availability: EMEA
• Portfolio: NETCONNECT®
• Product Type: Twisted pair cable
• Ordering Note: Available in Europe, Middle East, and Africa

General Specifications

• Product Number: CS34Z3
• ANSI/TIA Category: 6
• Cable Component Type: Horizontal
• Cable Type: U/UTP (unshielded)
• Conductor Type, singles: Solid
• Conductors, quantity: 8
• Jacket Color: White
• Note: All electrical transmission tests include swept frequency measurements
• Pairs, quantity: 4
• Separator Type: Tape separator
• Transmission Standards: ANSI/TIA-568.2-D |   CENELEC EN 50288-6-1    |   ISO/IEC 11801 Class E

Dimensions

• Cable Length: 304.8 m |   1000 ft
• Diameter Over Conductor: 1.041 mm |   041 in
• Diameter Over Jacket, nominal: 5.715 mm |   225 in
• Jacket Thickness: 0.559 mm |   022 in
• Conductor Gauge, singles: 24 AWG

Electrical Specifications

• Characteristic Impedance: 100 ohm
• dc Resistance Unbalance, maximum: 5 %
• dc Resistance, maximum: 9.38 ohms/100 m |   859 ohms/100 ft
• Delay Skew, maximum: 24 ns
• Dielectric Strength, minimum: 1500 Vac |   2500 Vdc
• Mutual Capacitance at Frequency: 5.6 nF/100 m @ 1 kHz
• Nominal Velocity of Propagation (NVP): 71 %
• Operating Frequency, maximum: 250 MHz
• Operating Voltage, maximum: 80 V
• Remote Powering: Fully complies with the recommendations set forth by IEEE 802.3bt (Type
• 4) for the safe delivery of power over LAN cable when installed according
• to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA
• TSB-184-A
• Safety Voltage Rating: 300 V
• Segregation Class: b

Material Specifications

• Conductor Material: Bare copper
• Insulation Material: Polyolefin
• Jacket Material: Low Smoke Zero Halogen (LSZH)
• Separator Material: Polyolefin

Mechanical Specifications

• Pulling Tension, maximum: 11.34 kg |   25 lb

Environmental Specifications

Installation temperature: 0 °C to +60 °C (+32 °F to +140 °F)

Operating Temperature: -20 °C to +60 °C (-4 °F to +140 °F)

Acid Gas Test Method: IEC 60754-2

EN50575 CPR Cable EuroClass Fire Performance: Dca